NEW AQUATHERM FLOW SWITCH WELL

To aid in mounting flow switches and other sensors onto Aquatherm pipe, Aquatherm has developed a new fusion outlet fitting to accommodate the larger paddle and/or sensor dimensions. The new fusion outlet configuration provides for a larger internal diameter, and shorter overall length. This allows flow switches with wider paddles or sensors with shorter elements, to be installed using a standard fusion outlet x threaded connection.

The new configuration consists of a standard fusion outlet connection, and standard threaded connection, in the following combinations.

Main Pipe Size	Fusion Outlet Size/Head	Threaded Connection	Part Number
2 – 2-1/2 inch	2-1/2 x 1-1/4 (75 x 40mm)	1-1/4 in FPT	0115175+0621116
3 – 4 inch	4 x 1-1/2 (125 x 50mm)	1-1/2 in FPT	0115197+0621118
6 inch and larger	6 x 2 (160 x 63mm)	2 in FPT	0115216+0621120

When using this new part one needs to verify that the paddle has a minimum length of 3-1/2”.

At present, these will be special-order items fabricated at the Aquatherm headquarters in Lindon, UT on an as ordered basis.

The accompanying sketch will illustrate the concept of this new product (click to enlarge).