NEW HYDRONIC HEATING SYSTEM WORTH THE EXTRA SCRATCH FOR ONTARIO CHICKEN FARMER

The Challenge

A poultry farmer and former fire victim needed a hydronic heating system that would reduce heating costs and eliminate combustion flame inside his barn.

The Solution

Piped entirely with aquatherm PP-R piping, the new heating system is safer, cleaner, and more efficient than any the poultry farmer has ever used or seen.

AQUATHERM PP-R PIPING’S FLAMELESS HEAT-FUSION TECHNIQUE A PLUS FOR FORMER FIRE VICTIM

Hugh Haverkamp has 35 days to take a barn full of baby chicks from a weight of less than 2 oz to 5 lb. That not only takes a lot of chicken feed, it takes a lot of heat, especially when you raise more than 500,000 chickens a year.

As a chicken farmer in Listowel, Ontario, Canada, Haverkamp knows all too well how difficult, costly, and even dangerous a challenge that can be. In recent years, Ontario livestock fires have resulted in as much as $35 million in losses per year, not including loss of equipment, agricultural products, or livestock. Haverkamp experienced such a loss himself when one of his chicken barns went up in flames in 2016. Although the cause of the fire was never determined, he decided to rebuild with a new heating system that would not only reduce his heating cost but eliminate any combustion flame inside the broiler barn.

Opting for a hydronic heating system instead of the radiant tube or furnace heaters that chicken farmers typically use, Haverkamp chose to install hot water boilers in a service room adjacent to the chicken area. From boilers to terminal units, the entire heating system is piped with aquatherm blue® polypropylene-random (PP-R) piping. The heating system is not only safer but also cleaner and more efficient than any Haverkamp, a lifelong poultry farmer, has ever seen or used.

BOILERS FOR BROILER

Heating systems are necessary in poultry barns for the development and weight gain of broiler chickens that are raised specifically for the food industry. Poultry farmers adjust the heat of the barns as the chickens grow, typically starting out at a space temperature of about 91°F for newly hatched chicks, then gradually decreasing the heat to about 68°F over a period of five weeks. By this time, the broilers have neared their market weight of 5 lb, assuming the barn temperature has been maintained properly. Chickens tend not to eat if they are too hot or cold. A consistent, evenly distributed temperature stimulates their appetites and encourages activity, both of which are necessary for optimum development.

Brandon Gleeson, owner/operator of Gleeson Plumbing Inc. in Moorefield, ON, designed and installed the heating system for Haverkamp’s new barn. Gleeson, part of a family of chicken farmers himself, was intimately aware of the unique challenges associated with heating a broiler barn. Honoring Haverkamp’s desire to not use combustion flames inside the chicken area, Gleeson installed five IBC 399,000 BTU/H condensing boilers that stage on and off to maintain a 140°F supply water temperature.

The boilers are connected to a 4-in. aquatherm blue® header pipe that supplies 3-in. pipes routed from the service room to the two-story chicken barn. A Wilo pump with two motors circulates 130 GPM of water into the system, which is split between the upper and lower levels at 65 GPM.

The water is routed through 1½ in. and 1¼ in. aquatherm blue, which supplies five Landmeco Calori-Air air-handling units per floor. These units, designed specifically for the poultry industry, hang from the ceiling and include a water-to-air heating element and a fan to distribute heat into the barn. Had Haverkamp opted for traditional tube heaters, he would have had to install 10 units per floor.

Given the total 2,000-ft length of mostly suspended pipe, the project would have been extremely difficult to install had Gleeson used black iron pipe instead of aquatherm PP-R piping systems. It also would have been messier.

“If we were to have run black pipe, we would have had to use a larger size to maintain the same velocity. The smallest size we could have used in the distribution would have been 2 in., whereas with aquatherm we could do it with 1¼-in. pipe,” Gleeson said.

aquatherm PP-R pipe has an extremely smooth interior surface, which minimizes pressure drop; therefore, a smaller diameter pipe often can be used. It is also extremely lightweight. Gleeson and just one other worker were able to install the entire system in less than a week, using Ritmo hand-held socket welders to create nearly 200 connections. The crew of two did all of the cutting and pipe fusing on the floor, then lifted the pipe in 200-ft sections for installation.

“I like to make things better when I can. If you ask me if I’d do it again, I’d tell you ‘I would!’ It’s nice and clean, and I don’t have wires hanging all over the place.” —Hugh Haverkamp, Poultry Farmer, Listowel, ON, Canada

aquatherm pipe and fittings are made with Fusiolen® PP-R, a material that is engineered to have an ideal melt index for socket fusion and butt welding, resulting in connections that are completely homogeneous with the rest of the pipe. The fusion process is quick and simple and yields a virtually leak-proof system. Unlike metal pipe, there is no open-flame welding, solder, or finish sanding necessary, all of which appealed to Gleeson.

“People like nice, clean joints. They don’t like to see pipe dope smeared everywhere. aquatherm eliminates the messiness you often see with metal pipe. And the only place you must use dope [or pipe thread tape as preferred by aquatherm] is on the threaded connections,” Gleeson said.

RECOUPING THE COST

Poultry barns are notoriously expensive to heat, especially in cold climates like Ontario. The high ventilation requirements, along with the high space temperatures, can peck away at a chicken farmer’s profits. So even though hydronic systems have a greater installed cost than radiant tubes or furnaces, they can be a good investment for professional farmers like Haverkamp, who raise several hundred thousand chickens per year. Haverkamp ran his own cost of performance numbers and anticipates a five- to six-year payback

“I like to make things better when I can. If you ask me if I’d do it again, I’d tell you ‘I would!’ It’s nice and clean, and I don’t have wires hanging all over the place,” Haverkamp said. “Brandon [Gleeson] did a fantastic job.”

Gleeson is just as pleased with the appearance of the piping job as he is confident of its performance.

“It looks beautiful. [aquatherm] is a nice, solid pipe to work with. And you’re guaranteed no leaks once you pass the pressure test,” said Gleeson, referring to the fact that PP-R pipes are not vulnerable to the corrosion and pitting that lead to leaks in metal pipe systems.

Using aquatherm, a properly executed fusion weld should last a lifetime. In fact, aquatherm backs their products with an extensive, 10-year, multimillion-dollar warranty that covers property damage, financial loss, and personal injury.

That’s a nice insurance policy for hardworking farmers whose livelihood depends on the precious livestock within their barns.

The German-manufactured pipe has been one of the world’s most durable and greenest piping systems for four decades and proven successful in 70-plus countries. aquatherm piping systems offer many performance and environmental benefits, such as:

• Eliminating toxic materials, glues and resins, and open flames from the piping installation equation.
• An R-value of 1 or more per inch or greater depending on pipe size and SDR.
• The fusion welding process, which creates seamless connections that last a lifetime without leaking or failing.
• An optional faser-composite layer in the pipe reduces linear expansion of the pipe by up to 75% compared to plastic piping.